Welcome! Register now to see your pricing!
Close
Solid Carbide Die Drill Bit, 1/8" Diameter x 1-1/2" Overall Length (Pack of 1)
Representative Image Only
• Produces chips without generating excessive heat
• Accurately sized holes are produced without annealing or softening the workpiece
• Reamer-type finishes are easily produced
• Two straight flutes
• Made in USA
• Designed to drill hardened steel in the Rc 50 – 65 range
• Both a production drill and a salvage or reclaim tool
• Drill through glass, all series of stainless steel, nickel alloys, ceramics or weldments
• Drill out broken drills and taps
• Can be used in a drill press or portable power drill
NOTE: The drill is intended to be run at 60 – 100 SFM. Carbide drills are normally run at double the speed recommended for high-speed steel drills with a slightly lower feed rate. Proper drilling speed and the appropriate feed rate must be calculated for the material being drilled.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
• Produces chips without generating excessive heat
• Accurately sized holes are produced without annealing or softening the workpiece
• Reamer-type finishes are easily produced
• Two straight flutes
• Made in USA
• Designed to drill hardened steel in the Rc 50 – 65 range
• Both a production drill and a salvage or reclaim tool
• Drill through glass, all series of stainless steel, nickel alloys, ceramics or weldments
• Drill out broken drills and taps
• Can be used in a drill press or portable power drill
NOTE: The drill is intended to be run at 60 – 100 SFM. Carbide drills are normally run at double the speed recommended for high-speed steel drills with a slightly lower feed rate. Proper drilling speed and the appropriate feed rate must be calculated for the material being drilled.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
